|
5 Gallon White Gelcoat w/ 12oz MEKP
|
|
Silmar 41 Clear Casting Polyester Resin, Quart w/ 1oz MEKP
|
|
|
|
|
|
Our
standard pure white gelcoat is designed for
exterior use in virtually all types of marine,
automotive and general part construction and
repair. Isophthalic base ideal for marine
applications.
No wax added. Pigment
can be added to change the color of the gelcoat
but any color added will be offset by the pure
white color.
Please note:
Our Surfacing wax
(sanding aid)
is required for your finish coat in order to
sand/polish this product.
|
Clear resin
used primarily in thick castings where a water
clear cured product is required. Used
extensively in decorative and artistic
applications. Catalyst ratio must be varied to
account for thickness of cast and temperature.
Testing suitability of this product is highly
recommended for unusual applications.
**Not for use as a thin coat laminating
resin.**
Transparent
pigments
can be added for desired effects.
Color:
Transparent Blue / DRIES
Clear
|
|
|
|
20 GALLONS 150 THICK EPOXY RESIN & 6-2/3 GALLON 3:1 HARDENER
|
|
4:1 EPOXY PUMPS (SET OF 2)
|
|
|
|
|
|
|
|
20 GALLONS 150 THICK EPOXY RESIN & 6-2/3 GALLON 3:1 HARDENER
|
4:1 EPOXY PUMPS (SET OF 2 PUMPS)
|
|
|
|
700 Vinyl Ester Resin, Quart w/ 1oz MEKP
|
|
1/2 GAL 635 THIN EPOXY RESIN & QUART 556 (2:1) HARDENER
|
|
|
|
|
|
|
Vinyl Ester
resin is superior in every property as compared
to all polyester resins. This product is used in
high-performance applications in which
high-strength and maximum heat tolerance is
necessary. This resin is extremely chemical
resistant when cured. Similar in strength to
epoxies with much increased stiffness. Vinyl
ester resin will cure slower than most polyester
resins and increasing your MEKP ratio may be
necessary in cold weather(below 75°F)
Color:
Dark Amber/Purple
|
1/2 GAL 635 THIN EPOXY RESIN & QUART 556 (2:1) HARDENER
|
|
|
